Головка принтера R1390 печатающая головка для Epson L1800 R260 R265 R270 1400 1410 1430 1500W RX510 RX580 RX590 R360 R380 R390 печатающая головка

Код товара: A1005004953442150

Кешбек: 15%

Магазин: АлиКэшбэк20

Пройдите простую регистрацию, чтобы делать покупки выгодно.

Applicable Models：

R1390 for Epson L1800 R260 R265 R270 R1390 1400 1410 1430 1500W RX510 RX580 RX590

R360 R380 R390 F173050 F173060

Voltage：110V and 220V

Package:Neutral package.

Weight:70g

Special Reminder

1. The print head is a fragile part. Before installation, please make sure that the ink pump of the machine is working normally, and there is no problem with the ink cartridge or continuous supply and ink, otherwise the print head may be easily damaged or the effect may not reach the expectation;

2. This accessory is the original disassembled machine, and it is tested on the machine before shipment and it has a printed sample. The original protective liquid is injected before shipment, which can protect the nozzle from clogging for 1-2 years when it is not in use. Do not wipe the nozzle head surface before installation;

3. Due to air intake or ink not completely filling the ink sac inside the print head, there may be a small number of nozzles that have not come out completely when you just start the machine. At this time, you only need to clean it with a computer 2-3 times and let it stand for half a day. Do not use a syringe to push the air, and do not use various cleaning fluids to infuse the nozzle. This is likely to cause cross-color inside the nozzle.

Troubleshooting machine problems and precautions

1. The red light flashes when the machine is turned on. It is not necessarily that the print head is broken. There may be a problem with the rack or the motherboard. In this case, please solve the error problem first, and then buy the print head.

2. The machine does not recognize the ink cartridge. The main reason for this situation is that the motherboard fuse is burned. Please replace the motherboard or replace the motherboard fuse.

3. Are there signs of splitting/corrosion or burnout on the data cable? If the data cable is broken or not inserted properly, the nozzle and motherboard will be burned. Please check whether your data cable is in good condition!

4. It is recommended that all buyers use good quality ink cartridges/ink/continuous supply, because the service life of the nozzle is directly related to the ink.

Tips

1. It is risky to install the nozzle/print head, so be careful. Buyers who do not understand the installation skills can contact the owner after receiving the goods, and we will try our best to provide you with services.

2. Before purchasing, please make sure that there is no problem with the motherboard of the machine, if there is a problem with the motherboard or the installation is missing

The nozzles will not be returned or replaced due to errors, and we are not responsible for the failures caused by poor technology.

3. If there is any quality problem within three days after receipt, contact the owner in time to avoid unnecessary numbness

bother.