Оконная пленка для конфиденциальности, декоративные оконные наклейки для дома, непрозрачные статические липкие окна и двери, Солнцезащитный оттенок для окон, наклейка на стекло

Код товара: A1005005068091222

Кешбек: 15%

Магазин: АлиКэшбэк20

Пройдите простую регистрацию, чтобы делать покупки выгодно.

Small Tips for YOU,please read before buying.

*Please Note that This Window Film Only Applies on Smooth Glass Surfaces.Do not Apply to Outside window or Windows with Crack.

*Don't forget to remove transparent backing side before putting on glass or it will not cling(Use a tape on a corner of the back side (the smooth side) to quickly remove the backing protective film).

*Please use a hair dryer to soften the film under cold weather (Heat Resistant up to 176℉)

Window Film Basic Information:

Lifetime: 8-10 Years

Technique: Digital Printing

Product Type: Glass Window Film

Material : PVC, Waterproof, Fastness

Key Advantages:

1.Protecting privacy: make the living space comfortable,you can fully relax at home

2.Opaque but Light transmission:filter strong light and reduce glare,Will not darken your room and same time protect skin and vision

3.No glue: easy to install, clean, Remove no residue , no chemicals

4.Adding beauty: adding aesthetics to buildings and furniture, blocking the undesired environment outside

5.Repeated use: no fading, no blistering, detachable and repeated paste, can be used for more than 5 years

6.Insulation and energy saving: summer heat insulation, prevent indoor heat outflow in winter, reduce air conditioning and heating cost

7.Block UV: block 99% of UV rays, protect indoor furniture and wallpaper from fading, slow down furniture aging and extend service life

Decorate Wherever You Want

Use your frosting window cling in your living room, kitchen, office etc. Stick it to your sliding doors, kitchen cabinets, mirrors, and much more!

Installation Instructions:

1. Clean the target surface thoroughly.

2. Measure the surface and cut the film. Leave an extra inch margin each side for an easy adjustment.

3. Prepare enough diluted soapy water in a spray bottle.

4. Spray the surface with the soapy water. Peel off the transparent backing film along a short side.

5. Install the film onto the window.

6. Use the squeegee to remove excess water and any bubbles whist applying the film. Wipe off the water using the towel.

7. Trim off the margins. Here you go!

Some useful tips for you:

• When applying in cold weather: before installation, blow hot air to the film using a hair dryer to soften the film up (Heat Resistant up to 176℉)

• The film works only onflat, clean, and smoothsurfaces.

• Affix a tape on a corner of the back side (the smooth side) to quickly remove the backing film.

• Pleasedo notapply the film todouble pane windows, as the temperature changes might cause the windows to crack.