Сканер PD3.1 decoy pd2.0 3,0 для быстрой зарядки и переноса данных, 12/20/28 в

Особенности:

Small form factor

easy to operate,

adjustable voltage,

with indicator light;

Wide range of applications, suitable for fast charging source testing aging/DIY power modification, etc.

Product parameters:

Style 1: PD/QC2.03.0 decoy

Product Description:

PD/QC2.03.0 decoy, its identification logic is: the decoy triggers a fixed voltage. However, if the voltage to be tricked is not available, it will be applied to the next gear. For example: if the module is set to 15V, if your PD power supply is only 12v at most, or if there is no 15V, the next-level is 12V, then the bait will apply for the next-level 12V. PD decoys have a strict communication format. It will not trick higher voltages, nor will it increase or decrease voltage output if there is no voltage. It cannot change the power, voltage and current of the power supply.

Whether the module is selected with E-mark depends on the actual requirements. The power without E-mark can only support up to 60W, and it needs to output more power, which requires E-mark support. If the type-c female input is to deceive 5A, the cable needs to support E-mark. The type-c male input module comes with an analog E-mark.

Product parameters:

color: blue

Fast charge support protocol: PD2.0/PD3.0, QC2.0/QC3.0

Support voltage: 5V, 9V, 12V, 15V, 20V (does not support voltage step)

Voltage adjustment method: According to the table on the back of the board, adjust the DIP switch to control the voltage output

Maximum power: support up to 100w ( 20V/5A ), need to match with emark wire

Size: 48*16*5mm (including DC and C port length)

Style 2: PD3.1 decoy

Product Description:

The hardware PD3.1 protocol chip is adopted, and its identification logic is: the decoy triggers a fixed voltage. However, if the voltage to be tricked is not available, it will be applied to the next gear. For example: If the module is set to 15V, if your PD power supply is only 12V at most, or if there is no 15V, the next level is 12V, then the bait will apply the next level - 12V. PD decoys have a strict communication format. It will not trick higher voltages, nor will it increase or decrease voltage output if there is no voltage. It cannot change the power, voltage and current of the power supply.

Whether the module is selected with E-mark depends on the actual requirements. The power without E-mark can only support up to 60W, and it needs to output more power, which requires E-mark support. If the type-c female input is to deceive 5A, the cable needs to support E-mark. The type-c male input module comes with an analog E-mark.

The module currently supports 5/12/20/28V output

Product parameters:

Colour: Black

Support voltage: 5V/12V/20V/28V four-level voltage (the actual value depends on your power supply)

Current: 5A

Input: Type-C female input (connect to the charger)

Output: DC5.5 output (connect load/aging equipment)

Size: 45*15*5mm (including DC and C port length)

The length of the single main board is 30mm and the width between the fixing holes is 14mm

Maximum power: support up to 160w (28V/5A) (actual value depends on your power supply)

with indicator light

Operation instructions: Power on and automatically poll the highest voltage. For example, if the power supply supports PD3.1 and 28V, it will start from 5V to the highest voltage of 28V and keep stopping (supporting downward compatible voltage), and there are corresponding indicators for the corresponding voltage.

Tips: Only when the connected Type-C double male cable supports PD3.1 can it trick 28V voltage

Note: Product batches are different, there are 2 types of random delivery with heat shrinkable tube or without heat shrinkable tube;

Some PD3.1 power supplies may not be compatible. If you need to purchase in bulk, take a few samples and test to see the effect.

Product List:

1X decoy module