Умный дверной замок для шкафа, RFID, 13,56 МГц

The intelligent induction drawer cabinet door lock is powered by 4pcs AAA batteries, no wires are required, no holes are required for installation, only screws are required; it is suitable for installation of various drawers and cabinets. (Note: The metal drawer cabinet door will shield the induction signal and is not suitable for installation)

If your cabinet door or drawer panel exceeds 25mm, please leave a message to us, we will replace the blue key with a card, and the sensing distance can reach 50mm. If the installation thickness exceeds 50mm, this lock cannot be used.

Note: If you use NFC to unlock, then your mobile phone must support NFC function; and you need to add an access card or credit card to the mobile wallet as an unlock card. NFC programs downloaded in the app market cannot be used for unlocking.

Features:

1. Master Card/keychain have been set for the lock, no need to be programmed or activated. All you need to do is to install 4 pieces AAA alkline batteries, you can use the lock.

2. This is suitable for wooden door only, special for drawer, locker, cabinet, slidding door.

3. No need to drill holes, No damage to your cabinet.

4. Auto-rebounce and auto-lock function, easy to operate.

5. It is compatible with IC 13.56KHZ CHIP CARDS.

6. Stainless steel latch and ABS plastic lock body, durable and anticorrosion.

7. Motor life span is about 100,000 times, The Static Power Consumption less than 5μA.

8. One master card can be set to open several locks. so you only have to keep one key to control all locks.

Technical Parameter:

Lock bucele Material: stainless steel

Lock body material: ABS Plastic

Accept cabinet or wardorbe door thickness: within 50mm.

Suitable for Wooden door only

Power supply: 4 pcs AAA alkaline batteries.

Battery life span: more than 15 months.

Operating temperature: -30℃～80℃

Antistatic behavior: >15,000V, information can be saved though in strong static

Static Power Consumption: <5μA

Dynamic Power Consumption: about 200mA

Low voltage alarm: 4.8V