Универсальный синхронизирующий карбюратор инструмент синхронизатор Вакуумный датчик мотоциклетный 4-цилиндровый синхронизатор

Использование инструмента:

• 1. The calibration unit is cm Hg (range: 8-42 cm Hg).

• 2. Ensure that the four cylinder balance instrument is vertical.

• 3. The instrument does not need to be zeroed or calibrated. During assembly, all parts are matched.

• 4. Dirt or oil stains enter the pressure gauge. The stainless steel column is difficult to move and can be cleaned.

• 5. After use, first remove the black rubber hose from the four cylinder balance instrument, then remove it from the inlet, and hang the rubber hose to drain the fuel.

Principle :

Stainless steel column is used to replace highly toxic mercury in balance instrument. The stainless steel column will be sucked by the negative pressure of the engine and float in the transparent conduit to indicate the balance state.

• More accurate than any dial or clock manometer we have tested.

• Better resolution than a typical dial indicator.

• Unlike a typical dial indicator, the four columns are adjacent for comparison and reading.